Physical Specifications for 70g ARGOS/GPS Solar Transmitter:

Dimensions: L 3.9” (98) x W 1.5” (38) x H 0.98” (25) (mm)*
Weight: 68 to 75 grams
* Antenna and harness mounting tubes not included in these dimensions
Antenna: Hard nylon coated flexible stranded marine grade stainless steel, 7.0” (180 mm) long, protruding from the back edge of the transmitter 45 degrees to the bottom face.

Construction:

The housing is constructed from an epoxy glass reinforced lightweight composite material, plated on the inside with a contiguous metal coating. The final seal is a metal to metal solder. The unit is therefore hermetically sealed and remains so during changes in temperature and humidity.

Sensors:

The 70g GPS solar transmitter comes complete with sensors to measure temperature, its own
battery voltage and animal activity, as well as a sixteen channel GPS receiver that calculates position,
altitude, heading and speed.

General Electrical Specifications:

Operating frequency: 401.650 MHz ± 36 kHz
Power output: 200 mW output is standard**
Output impedance: 50 ohms
Modulation Tri Phase PSK: ± 1.1 Rad ± 0.1 Rad
Quiescent current: <3 µA
Spurious emissions: -45 dB
Transmission interval: 45 to 120 sec***
Supply voltage: 3.6 to 4 volts
Operating temperature range: -15 to 45 Deg C
** Adjustable between 100 to 500 mW
*** This can be optimized for your requirements at time of manufacture

 

 


22 gram PTT-100

30 gram PTT-100

45 gram PTT-100

50 gram Patagial PTT-100

70 gram PTT-100